medphys
Active LVC Member
got the heater control valve from rockauto, changed it, (cleared PO430 and 1299) after overheating, now my A/C compressor isn't coming on, just blows hot air. checked and changed fuse (#1 10a), cked freon-OK, all connectors OK. there's a pinpoint test but I dont do the DIY electric cks yet. any place to start before I go to dealer
couldnt get the self test to activate either, pressed OFF and DEFROST but when I clicked the AUTO the system just came on and no displays. so I'm at a bit of a loss to eliminate things before actual compressor itself.
btw, I have an 06 with 68,500 and it is my 3rd and last LS. Had the 200 and 2003.
couldnt get the self test to activate either, pressed OFF and DEFROST but when I clicked the AUTO the system just came on and no displays. so I'm at a bit of a loss to eliminate things before actual compressor itself.
btw, I have an 06 with 68,500 and it is my 3rd and last LS. Had the 200 and 2003.