Kbwalker23
LVC Member
I've recently just swapped out the Degas Bottle, Thermostat housing, the water inlet connection (connects with thermo housing) as well as some unrelated parts (coils/brakes/belt).
I flushed the system from some cheap generic green coolant and am using the Motorcraft gold (I made sure to completely flush thensystem, heater core and all).
But now when I try to bleed the system of air, absolutely nothing will come out of the heater air bleed, I removed the hose and made sure it was clogged, and even if I squeeze on the upper radiator hose, only a drop will come out.
- I've successfully bled this system a handful a times before this.
Any suggestions or fixes? Or other ways to bleed?
I flushed the system from some cheap generic green coolant and am using the Motorcraft gold (I made sure to completely flush thensystem, heater core and all).
But now when I try to bleed the system of air, absolutely nothing will come out of the heater air bleed, I removed the hose and made sure it was clogged, and even if I squeeze on the upper radiator hose, only a drop will come out.
- I've successfully bled this system a handful a times before this.
Any suggestions or fixes? Or other ways to bleed?
Last edited: