TheBigRedOne
Well-Known LVC Member
Both of my drivers side window switch covers came off and I noticed that one of them is larger than the other. Does anyone know which one goes where?
Window switch covers
- Thread starter TheBigRedOne
- Start date
slowmkviii
Dedicated LVC Member
The one that says auto is the drivers side
TheBigRedOne
Well-Known LVC Member
When I got the car the black part that said auto was missing so I got one that didn't say auto, so therefore both of my buttons look the same.
slowmkviii
Dedicated LVC Member
Trial and error is what I did
Figure out what works/fits the best and go with it.
Figure out what works/fits the best and go with it.
Lownslowlsc
Dedicated LVC Member
x2. Iirc they have a certain contour to each of them. Keep switching between the 2 and turn them around if need be. A few carefully placed drops of sg and she'll be all better.
thaywood
Dedicated LVC Member
While we're on the subject, how do you remove the power window/door lock switch panel from the door panel? The mounting brackets on the underside of mine have apparently broken and my PW switches are now sunk down into the door panel. I've tried prying it out with a flathead screwdriver, but it won't budge and I didn't want to break it any further. Does the door panel have to come off to get to it?
My Great 8
Dedicated LVC Member
Yes, sir. It's not that bad of a job.
thaywood
Dedicated LVC Member
I figured as much
I've had the door panel off before when I replaced the outer door handle. I need to take it off anyway and fix the arm rest that's trying to come loose. I can just add that to the list of little nitpicky things I will be doing to the car once I get my Exploder back on the road