Washer fluid motor

[Jeffintampa]

Hi all,
Been awhile the site is totally different! Quick question well a couple
1. how do you change the squritter pump for washer fluid?
2. does anyone know were I can get lower hood strut studs? the little balls that the hood struts clip on?

Thanks

 

[Markviiiedrea]

1)There on the tank. Just under the bumper.

2) You will have to get one off of any car in the junk yard and weld it on.

 

[Jeffintampa]

Wow not easy thanks, I got under the car removed the 2 bolts that hold that Oil cooler, or what ever to get more room, I got it out, changed the motor, tried to blow the line out, and it wouldn't blow, The routing of the line to the squirter must be kinked or plugged.

Thanks all

 

[Jeffintampa]

Ok now new issue. not only does the squirter not squirt (motor runs) but low washer fluid comes on display

 

[miatatomark]

Check under the car to see if the water is coming out somewhere unlikely. Chances are the tubing is broken along it's path. Mine was completely separated under the fender liner drivers side, and would leave me a puddle under there. Replaced it with silicone vacuum line. Works perfect. There are many posts about the sender unit also.