I used LEMFÖRDER for my front upper control arms. Quality seemed very good to me. No problems so far.
If you figure about 300 for parts then that is 350 for labor. Not great but it sounds fair. Not a hard job but the drivers side is a little difficult to access. I found a 15mm gearwrench essential.
I just put the Mevotech brand brand Sway Bar Links on.. Thicker than Stock plus they come with grease fittings. Ordered from RockAuto Part #'s
MK80246 - Left Rear
MK80245 - Right Rear
MK80261 - Both Fronts