Update Engine Pics

[mespock]

OK she's almost finished but rest will not be done for a month.

Did a little spring cleaning on my 94....

Here is my Newer version of my cold air intake with 4" intake.

Also my 9mm Ford Racing plug wires, and a little bling bling on the driver's side plug cover.

 

[GMAN]

Rich, where can I get that angeled elbow? And what kind of cone filter did you use?

 

[02LSE96LSC91SE84TC]

Nice work. Like the Blue.

 

[Dern Humpus]

Man G2's are way prettier underhood.

 

[ONEBADMK8]

Nice but reloom that plate of spaghetti.

 

[mespock]

Nice but reloom that plate of spaghetti.

Hey it's better then the old set up... and it took me an hour to get it that un tangled.

Maybe we need a post on how to route those damn things.

 

[m_maker]

Best of both worlds ! Yes, it's a 1st gen car !

 

[02LSE96LSC91SE84TC]

Follow mine.

1st pic wider looms and futher forward.

2nd pic stock looms further back. How I have it currently except 1 little change that no one would notice.

 

[Stack]

Yeah do what milelongusername said

 

[billcu]

Those engines look great!

I changed my plugs and wires today and it looks horrible.

I tried to follow the diagram in the service manual and finally gave up.

My back was hurting by then, so I'll redo it tomorrow.

Thanks for the photos, I'll use them as guides. They don't look like the photos in the manual a bit.

That COP setup looks much better in the Gen 1 than it does on the Gen 2 too.

 

[Dern Humpus]

The 1st gen throttle body placement is straight dumb. The best of both worlds would be the 2nd gen engine in a 1st gen.

 

[02LSE96LSC91SE84TC]

Better views.

 

[billcu]

The 1st gen throttle body placement is straight dumb. The best of both worlds would be the 2nd gen engine in a 1st gen.

But then, that would be just another Gen 2 engine.

That engine has the best of the Gen 1 (the intake manifold)
and the best of the Gen 2 engine (the COP's).

 

[ONEBADMK8]

Best of both worlds ! Yes, it's a 1st gen car !

Damn you Gen2's!

 

[Dern Humpus]

I have heard that the 2nd gen IM flows better than the 1st gen.

 

[ONEBADMK8]

Nology's.

Big ole' MSD's

​

 

[m_maker]

Geno, that isn't a Gen 2. It's a 96 LSC.

I despise wires

 

[marked8]

Looking better Rich. Now you need to get rid of that second silencer baffle like I was going to.

 

[Sergmark]

Looks good Rich. It takes time and a good eye for detail to get the wires right

You the man

Jeremi looks awesome might have to update mine

 

[GMAN]

Geno, that isn't a Gen 2. It's a 96 LSC.

I despise wires

How did you did that with your 96 without wires?

 

[ONEBADMK8]

Geno, that isn't a Gen 2. It's a 96 LSC.

I despise wires

I still had the first wireless Gen 1.

 

[Moes8]

I still had the first wireless Gen 1.

it's still not fair!!

:gr_hail:

 

[mespock]

Looking better Rich. Now you need to get rid of that second silencer baffle like I was going to.

It's in process....

 

[02LSE96LSC91SE84TC]

I should point out mines a 96 which has a slightly different arrangement than the 93-95.

 

[Sal329]

I would like to swap COP in my Gen 1 how difficult is it?
Hmmmm well after looking at the pics Id rather have the Blower motor Geno has damn that is sexy :leghumper .
Is that a 03 Cobra motor?
Id like to port polish my heads and get a KB :gr_devil: