Trans Dipstick Install

[loud00ls]

I've been trying to find a simple way to check and fill my trans fluid and i finally came across this idea which ill soon test. I figured a few of you guys may be interested as well so i figured i would share my find.


http://www.fordmuscle.com/forums/tech-exchange/466716-5r55s-dipstick-install.html

 

[ILLS]

I would recommend just using a -6AN fuel cell bulkhead fitting, -6AN to 3/8" compression fitting. Then run 3/8" hard line (bought from any local Auto Zone). This will be much more functional than running a flexline which can be easily abraded. It will be slightly more difficult due to the hard tubing, but will be more tough. You can also use a trans dipstick from a Ford truck engine for yours vehicle. You will have to modify the length depending on which vehicle it came from but will make for a very put together setup that appears factory.