To those guys buying PC7424's...

[pektel]

I have some polishes that may be more effective with the pc than with my rotary. If you want some of them, just pay shipping. I'll try to do like 4-8 oz of each.

The polishes are Einszett Proline. I have all three in the series (Intensive Paste, High Gloss Polish, and Final Finish).

 

[pektel]

I should mention: The only real reason why I'm moving these is because I have 5 litre jugs of each. You know how long it would take one guy to go through over a GALLON of polish? I use 2-4 oz per trip around the car.

The other thing with these is they don't like higher rpm's on the rotary. They are ideal for a polisher like the porter cable. I mainly use my rotary, so these just sit on the shelf.

 

[JoshMcMadMac]

I am in. I am not even sure what all they are, but I love any opportunity to try new stuff...is that bad?

Pete, let me know what you want for a round of them...I owe you as it is.

 

[pektel]

I bet I can fit some of each in one flat rate envelope. so... $6 maybe?

You don't owe me anything. If anything, pay it forward.

these are just a different line of polishes to be used with a machine polisher like the PC. The Intensive paste is similar in cut to Menzerna Super Intensive polish. The High Gloss Polish would be similar to Menzerna PO106FF. And the final finish is sort of like PO85rd, but it may have a little protection in it too.

 

[TDUB]

I'm in pete. Let me know how much to ship to area code 84115.

 

[FASTLLS]

Same here..

 

[JoshMcMadMac]

I bet I can fit some of each in one flat rate envelope. so... $6 maybe?

Cool. I can send a check, MO, or PayPal gift...just let me know.

You don't owe me anything. If anything, pay it forward.

Thanks again. I am always sharing Mark VII parts for the cost of shipping, so I guess I got to be on the receiving end for once. It did a great job of cleaning the windshield, but unfortunately I do not think anything will get the mess out of the glass. Now I can see all the scratches a lot clearer, though! lol

these are just a different line of polishes to be used with a machine polisher like the PC. The Intensive paste is similar in cut to Menzerna Super Intensive polish. The High Gloss Polish would be similar to Menzerna PO106FF. And the final finish is sort of like PO85rd, but it may have a little protection in it too.

Nice. I have not played with Menzerna stuff, but have heard great things about it. I just buffed out our Mountaineer last weekend using Mequiar's 105...it turned out better than I expected with the little bit of effort I put into it. It was not that bad to begin with, though, and is an easy silver color. I might try this stuff on my roadster when it is tucked away this winter.

 

[1LoudLS]

I love any opportunity to try new stuff

thats what she said!

 

[JoshMcMadMac]

thats what she said!

Weak performance, but solid dismount...I give the attempt a 6.5.

 

[KD00LS]

I'm selling my PC7427, first gen. It really doesn't have that much use on it, probably did 3-4 cars in total with it. It comes with the Show Car Detailing PC Guard which makes it stupid easy to polish in tight spots, like doorhandles, without messing anything up. I also have put race-bike handlebar tape covered with electrical tape to knock down about 50% of the vibrations. Comes with handle and backing plate.

$90 shipped obo.

 

[Alax7]

Shoot. A few hours too late KD00LS, I just ordered the 7424 last night.


Hey pete, so I just dropped a pretty penny on that porter cable kit with the menzerna polishes and a lot of other stuff. I wouldn't mind trying some of these out. Let me know shipping cost to 90241.

 

[pektel]

So I just got back from that meet yesterday. Let me find some bottles and pour some samples. When I have them ready I'll pm everyone in this thread.

 

[Alax7]

Yeah no problem, no rush. I'll have the menzerna stuff to work with anyways