The Yellow plug under the seat is missing 1 wire, is that my problem?

[vikingdiesel]

Im not sure about white the yellow plug is but after read a few posts on here, it seems like an alternative for the clockspring. Well I looked under the seat and the red wire is cut, the green wire is OK, but the red wire is cut. Is that my problem then? So I dont need a clockspring? What is that yellow plug for anyways? TIA

 

[97stscaddy]

The yellow plug is for the side airbag that is mounted in the seat. That wire will need to be repaired for sure. It's not smart to use a crimp on wire connector for the airbag wiring, the two ends should be soldered back together and wrapped in heat shrink insulation.

 

[vikingdiesel]

The yellow plug is for the side airbag that is mounted in the seat. That wire will need to be repaired for sure. It's not smart to use a crimp on wire connector for the airbag wiring, the two ends should be soldered back together and wrapped in heat shrink insulation.

so I cant just tie the wires together and wrap electrical tape around it. You think thats the cause for my Airbag light and NO horn or do I still need a clockspring

 

[gcwimmer]

If the wire is cut, fix it properly by soldering as as described then you will know.