steppin' up

[mark007]

posted a week or two ago about selling a accufab 75mm tb and spacer, well they sold. and in their place was a 90mm tb and spacer. these two pieces are huge compared to the 75's. i was happy to get 'em, but sad when i bolted them up to the inlet manifold on the kb. i didnt realise it was that much of a difference in size between the opening on the inlets. it was perfect with the 75 but 90 is massive. now i gotta find a flowzilla manifoldyes, or port the stock inlet to a 90mm opening. well anyhow enough typing time for some pics.

oh and if you guys know of anyone with a flowzilla forsale drop me a im or email with info. kinda need one soon. disney's gettin anxious to get 'er done. or if theres any members who have one that might waana trade plus some cash(TTMARKVII) let me know.

 

[OldSchool1]

Don't port anything.

The new one should fit on the OUTSIDE DIAMETER of the intake!

<I crack me up!>

 

[mark007]

Don't port anything.

The new one should fit on the OUTSIDE DIAMETER of the intake!

<I crack me up!>

you and me both.

 

[mark007]

finally got around to getting the inlet opened up to a 90mm opening. came out okay. had to epoxy it on the bottom to close off the egr passage on the back, then smooth all that out. just need to clean up some in the intake and that should be it. let me know what ya'll think.

 

[mark007]

well making some last minute changes. went from the lucas 42's to the siemens deka 60's. fuel shouldnt be a problem now. just got to get a boost-a-pump to make it all good.

and on the intake side i saw that my only restriction left was the pro-m 80mm maf. but that too got upgraded to a Sct Big Air 2400 meter.