Spark Plug Firing Pattern, Changing plug wires

[uxler]

Putting a set of cobra wires on my car but can seem to figure where each wire is supposed to plug into the coil pack. On the engine block side its obviously 1-4 and 5-8 front to back on eacj side but i cant make sense of the coil side of the wires. Any help?

 

[unity]

CYLINDERS
4-......-8
3-......-7
2-......-6
1-......-5
(FRONT)

COILPACKS
13......78
65......42

Order: 1-3-7-2-6-5-4-8

 

[billcu]

CYLINDERS
4-......-8
3-......-7
2-......-6
1-......-5
(FRONT)

COILPACKS
13......78
65......42

Order: 1-3-7-2-6-5-4-8

What year car is this for? This is different from my 94 coil packs.

My 94's are:

63.....72
15.....48

They changed them but, I'm not sure what year.

 

[02LSE96LSC91SE84TC]

Yea they sure did, my 96 was different than earlier years. 96 my be the odd ball but I can't say for sure.

 

[rmac694203]

I just noted them as I took them off, and did them one by one to be sure. This may not help you now, but it's probably the easiest for the next time.

 

[98LSC32V]

The year it changed was 96.

 

[unity]

Thats news to me, but I dont think it matters. If you guys are right, and in 96 it changed, then I did my 95 as a 96 when I had it and it ran fine. Besides, the pairs are still the same so there should be no matter then anyway. Remeber, 2 spark pugs fire at once, hence 4 trigger wires for 8 plugs. Pairs are: 1&6, 3&5, 7&4, 8&2 So as long as the same piston pairs fire, no problem.