94_Linc_mk8
LVC Member
Whats up? Well, I am going to change the belt on the Mark. It looks fairly easy, but I couldn't figure out how to loosen the tensioner. Can someone help me out?
Serentine belt replacement
- Thread starter 94_Linc_mk8
- Start date
BigT
Active LVC Member
Real easy there is a square hole in the tensioner arm that a 1/2" drive breaker bar or rachet fits in. Put the breaker bar or rachet in the hole and apply pressure it is spring loaded. 15 to 20 minute job start to finish.
94_Linc_mk8
LVC Member
You're right, it was easy, and it only took about 20 minutes. THANKS!!!!!!!!
Markviiiedrea
Speed Bump
my tensioner some how got bent and i wnt through 2 belts before i figured it out, it was so easy changing the oil fillter is harder than the tensioner.