I want to do the jmod on my 98 and was wondering if I could use a separator plate from a first gen instead of drilling the 98 plate?? If not, can I use one off another ford ie crown vic or 97 tbird?? If so, what years?
I want to have firm shifts not jerking shifts. What is the best way to get there? Reading the tech article BlackIce istalled the lower 1-2 spring because the shift was too hard without it (I don't think it stated what level he went for). I plan on doing more n/a mods and was thinking of doing the 300-450 level with all springs. What do you guys think? or <300 with all springs?
Currently my only drivetrain mod is 4.10's, but I will do more.
Thanks guys
I want to have firm shifts not jerking shifts. What is the best way to get there? Reading the tech article BlackIce istalled the lower 1-2 spring because the shift was too hard without it (I don't think it stated what level he went for). I plan on doing more n/a mods and was thinking of doing the 300-450 level with all springs. What do you guys think? or <300 with all springs?
Currently my only drivetrain mod is 4.10's, but I will do more.
Thanks guys