Rough Idel STILL

[shorn]

Ok I just finished my vcg and seals . I still have a rough idel. What could it be now new plugs and coils were good too. Should i just replace all the coils? Also if i change the coils out do i have to pull the vc off again? Please help me out here guys!!!! Oh and one more tyhing I have a loud clunking noise comming from the front passanger side of the car (like a bad strut mount or something like that), but it seems to go away at highway speeds any ideas on that? I am thinking struts in the front? Any thanks for you time !!!

 

[d-i-s-t-o-r-t-e-d]

I am thinking it's the plugs or coils. Is the CEL on? But, from what I have been told by several mechanics that the cold weather wears out struts. I know my right one is wore out. It could probably be one of two things though. Either your ball joint which is the control arm assembly or it could be your strut. Best thing to do get someone to look at it or you can look at it yourself. If your ball joint looks fine then it is probably your strut.

 

[NYC LS8]

How do you know the coils were good? Just by looking at them? I'm gonna say that one or more of them are on their way out.

 

[NateRW21]

Coils....

 

[shorn]

Ok so if I replace the coils do i have to pull the vc off again? Plugs are new.

 

[NateRW21]

no, just the coil covers.