Required parts for Cobra intake swap?

[Science Abuse]

Looking at this:
http://www.ebay.com/itm/120853882674?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

Is that pretty much everything needed to swap into a 97 LSC, apart from a tune and EGR? Looks like I can get just the manifold and IMRCs from Corral for $300, that ebay ad would really only be a deal if it saved me the trouble of sourcing everything else.

Thanks!
Eric

 

[DLF]

Welcome.

Learn to use the search function.

http://www.lincolnvscadillac.com/showthread.php?t=81135

 

[Science Abuse]

Welcome.

Learn to use the search function.

http://www.lincolnvscadillac.com/showthread.php?t=81135

Thanks for that link.... but I did that long before deciding to do the swap, your thread on LOD was better.

The nature of my post was specifically that ad, as it doesn't list any part names or numbers: It just says "All parts pictured", and I'm not savvy enough yet to identify what parts might be missing. Things like IMRC bits and all the little valves and junk that tends to get bolted to intake manifolds and throttle bodies. I think I see and EGR, but what about IACs and things related to throttle cables etc etc.

Thanks again

 

[topher5150]

get a cobra throttle cable and intake tube, I used a rubber sewer coupling to hook up the intake tube to the air box. also you will need to extend some wiring harnesses and vacuum hoses so plan accordingly

 

[DLF]

Well, that ad has expired, but it didn't include the EGR valve or throttle cable bracket, and if you're going to retain the IMRC's, you can use the set that's already on your car.