Removing Plastic from Gages?

[xarruda89x]

For some reason there is water marks going down the plastic cover, covering the gages, is there an easy way to remove that plastic? I have to clean it out.

 

[rainjacks]

Check the instructions for installing the white face plate from LSKoncepts website.

 

[NYC LS8]

That whole side of the dash has to come out and the steering column has to get dropped.

 

[pektel]

You know, I could do a pektel post on how to change it. If only I had some white guages (hint hint NYC)

 

[NYC LS8]

LOL!! I knew that was comin'!!

If they weren't such a pain in the balls to get out and back in, they'd be in your hands by now. I'd really like to have my working tach and speedo back, but I gotta get in that mindset to do it.

 

[pektel]

No rush... I was just making sure you didn't forget

I recently purchased a dual action polisher, some polishes, pads, sealant, wax, and a bunch of other goodies to play around with for a while. Plus, I get to practice on other people's cars before I try it out on the LS!

 

[xarruda89x]

ah w/e, Its not that noticeable, just when the sun hits that area you can see the streaks.

Thanks anyways guys.

 

[exceptionaLS]

If its any condolence I have the same issue. Drips inside of the spedo

 

[exceptionaLS]

....spedometer....not drips in the michael phepls speedo

 

[rickztahone]

LOL!! I knew that was comin'!!

If they weren't such a pain in the balls to get out and back in, they'd be in your hands by now. I'd really like to have my working tach and speedo back, but I gotta get in that mindset to do it.

at your rate Tommy i think i'm going to purchase the gauges and get them up and running before you take yours out

 

[NYC LS8]

I don't have the time or desire like I used to