"Ray's switch" QUESTION

[nsjuice]

I'm confirming a technical question. In order for Ray's switch to "slam" the car, you have to first do a "sensor lowering mod" to desired lowering height?

Otherwise, The switch would just lower the car to factory lowered height?

please confirm this.

thank you.

 

[dnehthend]

i believe the switch airs out the bags completely no matter what height you are coming from, shouldnt matter

 

[rays brother]

it would be better to do THE SENSOR LOWERING. #1 it would look better. #2 it would put the car closer to the ground. If you do the sensor lowering i would drop the car about 3 inches give or take.

 

[Rich88LSC]

The Ray's switch will let all the air out of the bags to slam the car. You should not be driving around like that. Sensor lowering would be to drop the car an inch or two for the right look.

 

[nsjuice]

Thanks guys, including Adam... for the response.

I fully understand now.

 

[chicken]

just if anyone else is wondering, the only reason the sensor lowering is recommended, is so the compressor doesn't have to work longer raising the car higher