Question about my new polished cobra r's

[hellvez]

I just picked up this set off of ebay http://cgi.ebay.com/ebaymotors/ws/e...ADME:B:SS:US:1123&viewitem=&item=220250242073

I was wondering what size lug's I need to buy and does anybody know if they are hubcentric rims or what size rings I will need?

And one more thing reading on other forums some people needed spacers up front to fit right on some 17x9 cobra's does anybody know if there was problems with the 17x9 pollished rims?

 

[unity]

The bolt pattern on the Mark is 5 x 108, the ones you linked to on eBay are 5 x 4.25 or 5 x 107.95. I am not sure if .05 makes a big diff or not.

Here is a good site I use to reference stuff like this:

http://www.discountedwheelwarehouse.com/Vehicle_Bolt_Pattern_Reference.cfm

 

[Staffamerica74]

nice buy, they will fit fine, not sure if you need hub centrics or not tho, ask at tccoa

 

[Icarus]

5x4.25 and 5x108 are the same. They converted it to the exact number, thats all.

Lugs are M12x1.5

It's doubtful being aftermarket that they are hub-centric. Rings would be a good investment for peace of mind when mounting them, but wait till you actually have them to be sure, and also so you can measure them if you do need them (same to see if you need spacers too.)

What is the offset of the rims? I didn't notice anything in the auction stating this...

 

[hellvez]

Thanks guys I went to a used tire shop today and got 275's for the rear and 245'S for the front

They measured me for hubcentric rings and I will pick them up tomorrow