67Continental
Dedicated LVC Member
Does anyone here know how to pull an aftermarket stereo out of a mark? do i need some tool from ford?
pulling my stereo
- Thread starter 67Continental
- Start date
1wykdmk8
LvC Dues Collector
Usually every aftermarket radio has their own tools (brand specific usually). You can go to a local stereo shop and they should have what you need. :Beer
Sifrino3
Dedicated LVC Member
Don't pay for nothing. I have never had to buy a tool for a aftermarket radio. . .
You can be cheap and make a set of tools that looks like this:
Or you can buy it at autozone for like $3.99. You push them both in until you hear "click" then you kind of grip them together and pull. The radio should come out pretty easy, but sometimes it's a bitch.
Or you can buy it at autozone for like $3.99. You push them both in until you hear "click" then you kind of grip them together and pull. The radio should come out pretty easy, but sometimes it's a bitch.
67Continental
Dedicated LVC Member
thanks for the help guys, i appreciate it.
Jibit
Dearly Departed Friend
normally aftermarket stereo's use small tools that slide in on both sides to press in a clip.......a butter knife usually works. I don't think aftermarket stereos are held into place very well anyway so you may be able to grip the outside of the stereo and pull and you may be able to pull the entire unit out in one peice.....try the butter knife first though :Beer