j911brick
New LVC Member
Car I am working on needs an oil cooler. Turns out they are not available at any price, anywhere. Is it possible to a bypass or anything. Any way to fix it?
I show them as available.
6A642 Oil Cooler Assy **9Z-6A642-EA For Coolant Hoses To Oil Cooler, Refer To 8286 Lower Radiator Hose 11/2002 to 04/2006 1 $97.30
http://www.fordpartsgiant.com/Page_...isvinskip=&Attributes=37656,40901,30925,22102
What is the issue with yours? They can be bypassed. The 1st gen non-sport V8s didn't have them.
hey just did this last year. if you search you can probably find my post. i went ahead and replaced my oil cooler, but they do sell the the non oil cooler adapter as well if you wanted to bypass it to not have this issue again.
i bought all my parts through the dealer and only paid like 230 for the new cooler, and i think the non oil cooled adapter was like 180.
cliff notes lol, oil filter attaches to the oil cooler, so you can replace the oil cooler, or if you want to eliminate it you can buy the adapter that had no oil cooler and the filter will attach straight to that, but you will have to T the coolant hoses the way you would when bypassing a leaking heater core.
I show them as available.
6A642 Oil Cooler Assy **9Z-6A642-EA For Coolant Hoses To Oil Cooler, Refer To 8286 Lower Radiator Hose 11/2002 to 04/2006 1 $97.30
http://www.fordpartsgiant.com/Page_...isvinskip=&Attributes=37656,40901,30925,22102
What is the issue with yours? They can be bypassed. The 1st gen non-sport V8s didn't have them.
http://m.ebay.com/itm/00-01-02-Lincoln-LS-3-9-V8-Oil-Filter-Housing-XW43-6A644-BE-/251319452062
That's one for sale on eBay, non oil cooled. Part# is in the listing. Good luck!
I have a non-cooler adapter from my car if you want it.
U-pull-it Junkyards may have the coolers also. Finding one New is a problem.
^^lol i feel you it took a few flushes and ton of simple green
I feel like oil coolers are mostly useless. The block is full of oil and coolant. Their temperatures will almost always be pretty similar.
I bypassed my cooler with a 5/8" plastic elbow. The problem isn't oil getting into the coolant. The problem is coolant getting into the oil.