Quickett
LVC Member
Is it a consensus that when replacing coils to only use motorcraft? Has anyone used Power Pro or any other coils and have you had any problems with them?:feedback
My car was idling rough and throwing codes for 2 cylinders (1 and 4), so I put in 4 new ignintion coils on the 1-4 side made by Standard. This made the cylinder 1 fire but the others (2 3 and 4) were misfiring. So since I didn't know where to go from there, I took it to the dealer and they said they replaced coils 2, 3, and 4. Afterwards about a month+ later I would notice a hiccup every now and then when stopped at a lighth and right when I press the accelerator from a dead stop. So I took it back and told them to replace the other 4 coils (5-8). Been running fine. Thats just my experience. So I'm running 7 motorcraft coils and 1 standard.
i had a buddy who did the 'all new' coils job. what i had the dealer do was replace the coil causing the rough idle and hesitation between 40-60. this cost $250, for a 3-4 month fix.