Hi guys I just purchased a 2005 ls v8 (after my 2002 ls8 was totaled) and I was interested in a mesg grill. I know alax7 had a nice one he made for sale a while back. I would like to know where I could purchase some mesh like that to also make a grill and use the mesh for a lower bumper grill as well...... any ideas please. Iwant the mesh to be chrome or something like a shiny finish. Don't want anything that looks dull. Kinda tired of the same old billet grill.
mesh grill
- Thread starter cjluvls
- Start date
Shredicus
Dedicated LVC Member
http://www.ebay.com/itm/LINCOLN-LS-...:Lincoln|Model:LS&vxp=mtr&hash=item27bab3b023
Check ebay. If the one I linked is too dull take some aluminum or steel polish to it.
Check ebay. If the one I linked is too dull take some aluminum or steel polish to it.
I must respectfully advise against that one. I ordered one, drove around for about an hour with it on and then admitted to myself how crappy it was. Followed immediately by admitting to myself that the money spent could have gone towards a better grille later.
Shredicus
Dedicated LVC Member
Haha good feedback I know literally nothing about these grilles. Just remembered seeing them when I was looking for my LSE grill
Shredicus
Dedicated LVC Member
:yuck:
LOL I'm laughing because even your avatar looks like he is reacting to that description. Luckily I was unimpressed as soon as I pulled the mesh out of the box, so I did a temporary attachment and never drilled the holes. The mesh is in the closet under some stuff lol
There are 2 pictures on that listing. The first one is a cdc grille with cc mesh. The second one is a completely different style of mesh, its flat and not woven. The cdc mesh is woven and each line is round.
I bought mesh that was woven and almost identical to the cdc mesh except it was slightly thinner to allow for easier cutting. I had to buy a big rol, 3x25ft bit sold most of it. I might have just enough for you to use for a top and bottom grille. I'll try and check this week.
I bought mesh that was woven and almost identical to the cdc mesh except it was slightly thinner to allow for easier cutting. I had to buy a big rol, 3x25ft bit sold most of it. I might have just enough for you to use for a top and bottom grille. I'll try and check this week.