lowered Marks- any issues with swaybar end links?
- Thread starter purpony
- Start date
Lownslowlsc
Dedicated LVC Member
I wouldn't say I have "issues", but they could stand to be a little shorter in the rear. It's been lowered for almost 2 years and I still haven't bothered doing anything about it.
mikeskustomfab
Well-Known LVC Member
mine lays flat on the ground and i have zero issues with my sway bars or links
I made sure my rear anti-sway was parallel to the ground when I lowered mine like what Mike ^^^ did.
But it is an Addco aftermarket with end links that I was able to adjust.
The factory end links are not adjustable unlike the Addcos.
You can get end links made by Energy Suspension to replace the stock ones,
mod it to level out the anti-sway bar so its parallel to the ground (at ride height).
.
But it is an Addco aftermarket with end links that I was able to adjust.
The factory end links are not adjustable unlike the Addcos.
You can get end links made by Energy Suspension to replace the stock ones,
mod it to level out the anti-sway bar so its parallel to the ground (at ride height).
.