knock sensor data logging xcal - repost

[02LincLS]

Just wanted to try this again in a higher traffic area...

http://www.lincolnvscadillac.com/showthread.php?t=42296

Need knock sensor values that people have logged with xcal while making WOT runs.

 

[Justin00LS]

What is the "name" in livelink that you use when looking at your knock during wot?

 

[ILLS]

Spark_ADD_KS in the Knock Sensor sub-menu in Livelink. That is the PID I log for when I want to see if my PCM is pulling spark due to knock sensor activity.

I have a few special knock sensor tuning modifications so that they retard timing globally through all sensors so I only need to log that single PID. I would suggest logging that above PID as well as 0, 1, and 2 of the same. It will give you an idea of what is going on.

Remember that these LS knock sensors are pretty sensitive so there will probably be times where you encounter them pulling timing when there may not be any pre-ignition occurring. They will give you an idea of things though.

 

[02LincLS]

Thanks! I'll check this out over the weekend.