michaelanezinis
LVC Member
I'm going to replace my current bulbs with 9006 Xenonmatch plus bulbs and connectors this weekend. Anything I should be aware of before installing? Thanks for the help.
Installing Xenonmatch plus Bulbs
- Thread starter michaelanezinis
- Start date
G
GrayGhost1
Guest
Follow this install that Danny Norton did with this Hoen bulbs. He used Posilocks which work great for the connectors.
http://www.lincolnvscadillac.com/showthread.php?t=16216
http://www.lincolnvscadillac.com/showthread.php?t=16216
mholhut
Dedicated LVC Member
My buddy ordered the Hoen's from Ken for his Trailblazer SS.... sweet lights! He also got the harnesses but he didn't specify which one's he needed. It's a different connector for the 9005's as opposed to the 9006's so we had to modify one with a dremel... no big deal though. On the LS it should be pretty straight forward.
G
GrayGhost1
Guest
Actually the 9005's do not require the connectors. It is only needed for the 9006 and H11 bulbs since the operate at 80 watts. The 9005 plus bulbs operate at 65 watts.
JES_LS
Dedicated LVC Member
Well I have the hoens all my vehicles except the Honda motorcycle and that is only because it is a royal b!tch to change them out, so I'll wait until the silverstars that I previously installed die.
I have not had any issues with the higher output bulbs in any of my cars, and here in headlight anal NJ. The Hoens are still white enough to pass at inspection time.
I have not had any issues with the higher output bulbs in any of my cars, and here in headlight anal NJ. The Hoens are still white enough to pass at inspection time.
michaelanezinis
LVC Member
Thanks guys!
G
GrayGhost1
Guest
Glad to hear that. Also, when I made your angel eye headlights I did not adjust the headlights. It is recommended that you adjust them since they could be off.Boomhower said: