Installed subs now car speakers dont work

[Lux]

Finally got around to hooking up some 12's i had and now the interior speakers dont work.

The car was off and all that jazz on initial bootup and the only thing that works is the subs.

Its a 4 channel amp bridged to 2 channel to run subs only.

I put my stock radio back in, the interior speakers work fine.

I disconnected the rca's and remote wire and still nothing out of the speakers from the aftermarket kenwood i have.

I did everything just as i should, i've installed tons of aftermarket stereos, amps, speakers, subs, so i'm not new at this.

any ideas?

I have a feeling the speaker output is fried for some f*cking reason in the headunit. I've seen this in kenwoods before.

anyone got a sick touchscreen double din laying around?

 

[playboy4aday]

I got 3 but just sold the last one to my buddy, and i put it in his 03 stang.

So let me get this you have a Kenwood DD deck and its hooked to the factory system, with RCAs of the deck running to sudo-sub amp (4 into 2). take a crappy speaker that you have lying around and hook it straight to the speaker wires coming from the Kenwood and see if it works if not then its the deck. Hell if you got a 4 channel amp and the RCAs are all good just rewire the car and have the subs off the back half of the amp and run the highs off the front half, done deal.

Without being there its hard to trouble shoot.

If you need more help just PM me.

 

[Chadly]

Get rid of EVERYTHING stock and rewire it.

You'll be glad you did.