IMRC opening on 98 LSC?

[98LSC32V]

Anyone know the exact RPM the IMRC's open on a gen 2? I have heard it's anywhere from 3200-3300rpm? Reason I want to know is I want to set my digital window switch to spray only when they are open...

 

[kustomizingkid]

Hmmm... do you want to know the commanded or actual?

 

[98LSC32V]

Both?

 

[XLRVIII]

set the window switch to 3100

 

[kustomizingkid]

Sounds about right Tommy.... commanded is 3002

It hard to say how quick they open and under a WOT run at what RPM they are fully open at.

 

[Chadly]

They open in a fraction of a second. Pop your hood and rev it up with the TB while you watch behind the intake. You can see the motors moving and its pretty dam quick.

 

[XLRVIII]

Pop your hood and rev it up with the TB while you watch behind the intake..

then once you SEE the cables move, run back around the drivers door and look at the tach and see what RPM it was at...
(lol)

Datalogging is your friend...

 

[mrzeee]

then once you SEE the cables move, run back around the drivers door and look at the tach and see what RPM it was at...
(lol)

Datalogging is your friend...

isn't that is how you check that your brake lights are working too!! step on the brake and run to the back!!

 

[XLRVIII]

isn't that is how you check that your brake lights are working too!! step on the brake and run to the back!!

yea and I ran my AZZ off checking fuel pressure at WOT.
Why did ford put that damned schrader way up there?

when I found my fuel pressure was low I just hooked a bicycle tire pump up to it and it and had Tiff pump it up whenever I wanted to go fast.