I need a favor

[k9t8m]

I need someone with a base 95 or 96 to measure from the bottom of the chrome moulding body line on the rear bumper to the top of the exhaust cutout. Thanks

 

[Gilby959798]

text me around 7 and I'll get it done.

 

[Stangman]

I've got a bumper cover in storage I could check around 5:45

 

[mespock]

How about a 94 with a 95 bumper on it ... LOL

 

[mespock]

As I know why you want to do this ... 8 inches should do it from measuring from the bottom of the trim strip to where you'd like to put the cut.

 

[mikemark8]

I need someone with a base 95 or 96 to measure from the bottom of the chrome moulding body line on the rear bumper to the top of the exhaust cutout. Thanks

7 1/2 inches following the contour of the surface (with a tape measure). using a straight edge it is 7 1/4 inch from the bottom of the molding cutout to the top of the exhaust tip cutout (center).

 

[k9t8m]

Thanks fellas. Ill go get the torch.

 

[Dmaup]

Ill go get the torch.

Want some help? I'll bring a big hammer

 

[JAX.TRUX]

chainsaw

Want some help? I'll bring a big hammer

chainsaw

 

[Icarus]

If your cutting your own, remember theres a metal bumper support in there too I found this out on my '94