I am trying to remove the rear pillar cover due to the defroster wire terminal becoming detactched. I am unable to remove the botom of the pillar cover, Id like to be able to slide it down seat belt to get it out of the way. Whats the trick to unsnapping the bottom of the cover? Thanks in advance to responding.
How to remove rear pillar cover?
- Thread starter REDBED
- Start date
lincolnelite
Well-Known LVC Member
You need to remove the bolster seat first, once that's out just pull the trim straight out.
There's a bolt down under the bolster seat that holds it and then a plastic lever similar to the bench seat near the top that you slide down/up for removal. I think slide down on the driver side and up on the passenger side.
There's a bolt down under the bolster seat that holds it and then a plastic lever similar to the bench seat near the top that you slide down/up for removal. I think slide down on the driver side and up on the passenger side.
joegr
Dedicated LVC Member
You have to take the rear seat out.
http://deneau.info/ls/s6x~us~en~file=s6x15005.htm~gen~ref.htm
http://deneau.info/ls/s6x~us~en~file=s6x15005.htm~gen~ref.htm