How to bleed a new power steering rack

[G-RELL]

Anyone have a procedure on this? Installing a new one this weekend (hopefully).

02LSV8

 

[G-RELL]

and does this part # seem correct?

1W4Z3504AARM

 

[joegr]

Gen I should be the same as gen II on this.
http://deneau.info/ls/s6x~us~en~file=s6xsb00l.htm~gen~ref.htm

 

[G-RELL]

can you confirm that part #. It seems correct on everything I've looked at, but the image he has looks wrong

http://kansascity.craigslist.org/pts/4107864393.html

 

[G-RELL]

part number seems right (its whats on the box). but the image seems like a continental rack...

http://www.oemfordpart.com/oem-part/oem-ford/steering-gear/1w4z-3504-aarm

http://www.ebay.com/itm/99-00-01-02...d=100033&prg=1011&rk=4&rkt=4&sd=190972316337&

Guys says his son bought it but never installed... I think i'm going to pass

 

[G-RELL]

OR....does anyone think the 1st and 2nd gens were the same?

http://www.oemfordpart.com/parts-ca...-9l-v8-gas/steering/steering-gear-and-linkage

http://www.oemfordpart.com/parts-ca...-9l-v8-gas/steering/steering-gear-and-linkage

 

[jmtiseo]

Procedure is pretty straight forward, sounds like death the first couple times but should go away.

Looks about right, there should be part numbers stamped on there somewhere to double check ask for a pic of it. If you ask me, $50 or less is worth a shot. You could salvage the tie rods if the steering gear has an issue.