How do you remove 2001 ls headlights?
- Thread starter bluejet
- Start date
G-RELL
FULLY DIPPED LS
three bolts... one on top attached to a thin plate, one toward the middle of the car (corner of the lens, under a plastic cover, and one in the back under the harness... all three are 8mm and can be seen from the top... easy to get to
hite337
Hite Performance
But first you must remove the radiator cover, bumper cover and the flux capacitor so you can see the bolts
hite337
Hite Performance
The plastic bumper cover under the hood latch lever needs to be removed to expose the bolts at the inside corner of the headlight. There are 3 push pins, push on the center and remove. Also pull up on the air temperature sensor to remove that.
To remove the Flux Capacitor....You must first circumvent the percetion of relative dimensional algorythmic ratios before you can superceed the time/space reality of your perception. Only then may you safely remove the flux capacitor....Oh and dont forget to use genuine Lybian plutonium only. Anything less will....well, you'll find out.
To remove the Flux Capacitor....You must first circumvent the percetion of relative dimensional algorythmic ratios before you can superceed the time/space reality of your perception. Only then may you safely remove the flux capacitor....Oh and dont forget to use genuine Lybian plutonium only. Anything less will....well, you'll find out.
chocolat1701
Dedicated LVC Member
its upgrade time I have a mr.fusion for sale. but you need a sct flasher to load up the new flash from torrie.
1LoudLS
Dedicated LVC Member
once you remove the top piece of plastic that runs across the whole front of the car, and the piece of plastic in the center of the grill, there is three bolts staring at you, if you dont see them or cant find them, then you need to but the tools down before something gets really F'ed up. it really doesn't get much easier than this.
G-RELL
FULLY DIPPED LS
IM scared for you....GL