headliner

[bb58926]

has anyone tried gorilla glue for the headliner board where it sticks to the velcro?? just curious if it might work

 

[beaups]

i asume you have black on black? there was a tsb for this, the velcro separating in the rear. I can't remember the adhesive I used, but yes gorilla should work.

 

[gcwimmer]

If your talking about where the headliner detaches from the high third brake light - I used fast setting epoxy glue.

 

[bklene50]

mines falling down up by the sunroof if thats where youre talking about. I plan to try the gorilla glue sometime soon but i always forget to take care of it. If i remember this weekend ill let you know how it goes.

 

[eastcoastLS]

mines falling down up by the sunroof if thats where youre talking about. I plan to try the gorilla glue sometime soon but i always forget to take care of it. If i remember this weekend ill let you know how it goes.

+1 on the rear side behind the sunroof dead center in the roof, theres a noticeable quarter to half inch gap between the sunroof shade and where the headliner ends

 

[owlman]

Mine doesn't stay up well by the 3rd brake light either. And the car is only a year old! what a piece of .....

 

[gcwimmer]

TSB 03-17-02

Try this:

http://forums.llsoc.com/index.php?ac...e=post&id=3399

 

[9enisP]

I'm having the same problem around the sunroof in my '01. I think I'll try the Gorilla glue today.

 

[beechcraft11]

lol same problem ^

 

[eL eS]

LOL... Mine has the same issue near the upper 3rd brake light. Think I will let the dealer handle this one while it is under warranty.

 

[itsnotmydaddys]

My 00 is doing it by the sunroof and also back towards the back. I dont have a 3rd brake light up top so im guessing thats where all of yours is falling to. So the TSB does that mean that they will fix it for free or what.

 

[dtx01]

Today I found a long piece of double sided velcro in my room. I ran it from end to end on the brake light then attached it to the headliner. So far it seems to be staying up. If not I will bust out the gorilla glue. I didn't want to use gorilla unless I had to b/c soon I will be running my Sirius satellite radio antenna out that way.