has anyone bought from this vendor?

When You click the buy it now it would say purchase more? or something like that go back and get the other one, and it would combine the shipping from you since they from the same store.
 
rickztahone said:
question, if anyone has gone ahead and bought them. do i buy one and then the other w/out paying the first and then pay them together? or do i buy one, pay it and then buy the other? i'm not sure how that works since he doesn't have an auction that includes both. anyone with input please let me know
Click to expand...

I contacted him and had him forward me an invoice with both the right and left on it. This included the little shipping discount for buying more than one item.
 
ok so i have the headlights in my possession and preheating the oven. the only thing, this gray sealant looks a lot more resistant. so these might be the same as the ones ken was talkin about. we shall see in about 10-15 minutes
 
so they are apart! wasn't difficult either. the only difference is that these lights have a different sealant, it looks more like a gasket than glue. either way i'm about to try to pop my angel eyes on these bad boys. sorry forgot the camera. post some pics later
 
question, i need to take off the chrome part from the headlight backing. do i just unscrew the main screw that adjusts the light? i can't seem to take it off
 
I thought it was just loose in there. Not loose exactly, but I don't remember anything securing them in the stock oem lights.
 
Are you talking about the chrome reflector? It snaps onto these round nubs via white plastic things screwed into it. The round nubs are at the end of the two adjusting screws, and there is also a stationary one. I will see if I can find a good picture for you. You just have to pull hard on the reflector to get it to pop out. Be careful though, and apply equal pressure at the points where it's snapped onto these.
 
Here's a picture of the stationary round nub that the the white plastic piece snaps onto (the other two that are at the ends of the adjusting screws aren't in the picture because I've already removed them) - it's right next to the 'c' in the watermark - and there are three of them per headlight. The white plastic piece is screwed onto the reflector.

100_2591.jpg


And here's a good one showing the white plastic snap pieces. Note that in the picture they're currently unscrewed from the reflector. These pieces screw into the reflector and snap onto the round nubs shown in the top picture.

100_2878.jpg


Hope this helps! Good luck!
 
You must log in or register to reply here.

Members online

No members online now.
Total: 812 (members: 0, guests: 812)
Back
Top