Gen II Air Injection Pump

GMAN

Dedicated LVC Member
Joined
Jan 26, 2005
Messages
4,743
Reaction score
31
Location
Spring, Texas, United States
Has anyone had any dealings with this pump? Does i regularly go out? Is it hard to remove?

greg.jpg
 
You can just turn it off with a chip, no need to remove. If you remove it without a chip you will get a CEL anyway.
 
Frogman, I don't think max will mind. I currently have the CEL light.

98, how much does the chip cost to eliminate this?

Is my pump broken, is this the reason I have this problem?
 
A basic chip cost around $300 but it will do a lot more than just turn off your air pump. Contact Torrie at fastpartsnetwork.com or Lonnie at blueovalchips.com, they will hook you up. Make sure to tell them exactly what you want.
 
that pump has my CEL on too i need to change it in the next couple of months to get a state inspection sticker. what is the total purpose of the pump?
 
Its the secondary thermactor pump which injects air into the exhaust for the first 30 seconds of operation. You will hear it kick on briefly after coming to a stop at normal operating temperature.
 
Last edited:
so that's why when i start up for the first time or for a long time i smell a funny smell from the exhaust?
 
Frogman...you are correct I did send that drawing to Greg. And I do not mind if you can save him some bucks on that pump. It has a list of $244 and cost LVC $144 but if a used one that works can do the job go for it, I am all for recycling the old parts to save!!.
Max
 
Thats the one....the engineering number on that crosses to the real part number. I could not say why it malfunctions.
.
Max
 

Members online

Back
Top