Gen 2 HID healights for sale

starfox86

starfox86

Well-Known LVC Member
Joined
Feb 6, 2009
Messages
412
Reaction score
0
Location
Cape Coral
I have a set of 04 Gen 2 headlights with bulbs and ballasts. They are prewired for a gen 1 harness. So... its plug and play for gen 1. If interested, send me a text at 239-849-0092 and send me an email address and I will send pics to the email. They have no fading or sun damage..although each headlight has minor splinter cracks by the top front corners..they do not take in moisture. I bought them from a lvc member and have used them for about a year. They have had no issues. I need them gone quick. Make an offer.
 
Can they be rewired back to gen II??

Do they have angel eyes??
 
I just need a set of headlights to run so i can get angel eyes.

I would then put them back up for sale.
 
Black, we might be able to work something out. I have a 2006 Premium, not Ultimate so I lack the factory HID's. I want to do Angel Eyes at the same time as the factory HID's, but I'm in no rush to need them.

Since I would be the final owner of what is being sold, I'd like to see how bad the cracks are that have been described.

So... any pics possible?

TRU
 
Sorry, Starfox - should have read your original post more thoroughly. I've sent a text to your phone.

My bad,

TRU
 
Tru-Blu said:
Black, we might be able to work something out. I have a 2006 Premium, not Ultimate so I lack the factory HID's. I want to do Angel Eyes at the same time as the factory HID's, but I'm in no rush to need them.

Since I would be the final owner of what is being sold, I'd like to see how bad the cracks are that have been described.

So... any pics possible?

TRU
Click to expand...

what are you thinking??
 
I was originally thinking that you could get them and you'd have a buyer ready to buy them from you when you're done with them, since I'm not in any hurry to do this. Or, I could get them and let you use them while you're getting your existing housings angelized.

StarFox sent me some pics, and the cracks were a little larger than what I'd like to see on my baby for permanent use. I'm thinking about checking with Alax to see if I could cut my existing non-HID lenses and put them on the HID housings. That would be the only way I'd be interested in purchasing these.

For the record, it does not look like (as StarFox has already stated) that the cracks are all the way through. I'm only gauging that by the pics that were sent.

Thanks,

Tru
 
Last edited:
something could be worked out.

all depends on price.
 
Tru-Blu said:
I'm thinking about checking with Alax to see if I could cut my existing non-HID lenses and put them on the HID housings. That would be the only way I'd be interested in purchasing these.

Tru
Click to expand...

Yes you can, as long as you cut in the same place for both lights, best bet is where I cut in my how-to video
 
@ Tru-Blu

I think what we could do is you could buy them, get them installed and working with your vehicle and once thats verified then i could pay for shipping plus something on top of that for you letting me "rent" them so i can send mine off to get done.
 
You must log in or register to reply here.

Members online

Total: 143 (members: 1, guests: 142)
Back
Top