Lownslowlsc
Dedicated LVC Member
Well they are dammit. They are used and made by arnott. I put them in about a month ago and they started leaking right away. 1 was leaking from the top rubber bushing When jacked up only allowing all the air to come out, i fixed that. I did the soap/ water trick and there were no bubbles. When i installed this set i used new #35 orings and the solonoid apears to be sealed.
Am i missing something?
Worst case scenareo is that i'll just put my oem right back on and by a drivers side of ebay. the old one was seized
Am i missing something?
Worst case scenareo is that i'll just put my oem right back on and by a drivers side of ebay. the old one was seized