Fogs with Highbeams?

[PGA2B]

Any electrical guys around here that know how to do this? I did this in my Grand Prix and it was just a jumper wire and a change in the switch wiring. Not sure about the LS though.

 

[J3FF]

I have 9005 Silverstars in my foglights. They just plug right in.

 

[TheRebel]

Are you wanting the fogs on with the high beams? If so your are going to need a relay. There was a post on how to do this a couple months ago.

 

[Jim Henderson]

This can be done, but unless you are doing it for looks, this defeats the purpose of fog lamps. If you are in a fog with High beams on, all you will see is fog. You want low beams and low mounted fog lamps when in a fog, you want to light up the road under the fog, not the fog itself.

A relay and some wiring would do it.

Jim Henderson

 

[PGA2B]

There was a post on how to do this a couple months ago.

Can someone post up a link? I could not find anything when I searched for it.

 

[TheRebel]

here's you a crude schematic

 

[Frogman]

You might want to get a wiring diagram. I have this mod done on my Superduty. All I had to do is cut one of the wires coming out of the fuse box, and jump a 12V+ source to it. Stock controls such as just parking lights and foglights only remain.