Fog Light Replacement

[remogaggi]

Hate to sound stupid, but is it worth going the dealer, or is it as easy as replacing a brake light???

 

[tubbyLS6]

not that hard at all

 

[rickztahone]

it's super easy. jack the car up a little, it makes it that much easier. there are 3 screws on the gen 1's i believe. they are long screws so be patient. on a scale from 1-10 i'd rate it a 1 3/4, LOL.

 

[pektel]

Grab a beer too. one was kind of frustrating for me. Mine had fogged up, and I pulled it to use a fan to get the moisture out. One of the screws was kind of a beotch to reach.

You may have to drop the splash shield too, don't remember though.

 

[rickztahone]

Grab a beer too. one was kind of frustrating for me. Mine had fogged up, and I pulled it to use a fan to get the moisture out. One of the screws was kind of a beotch to reach.

You may have to drop the splash shield too, don't remember though.

LOL, i always grab a beer no matter what i do to my car Pete. if i could drink at the gas station while filling her up i'd do so

 

[Rich88LSC]

I can just reach up under the car to get to mine. 06 is the LSE still bumper/fogs though so YMMV. Harderst part was sylvania website had the wrong bulb listed. I found out the hard way H10s don't want to fit where H11s should be.

 

[pektel]

I thought he was asking about changing the lens assembly.

But yeah, if it's just changing the bulb, just reach on up there.

 

[pektel]

LOL, i always grab a beer no matter what i do to my car Pete. if i could drink at the gas station while filling her up i'd do so

:Beer

 

[Rich88LSC]

I thought he was asking about changing the lens assembly.

But yeah, if it's just changing the bulb, just reach on up there.

After read his post again you might be right