Finished pillar pods

[2002_lincolnLS]

I wrapped the whole pillar there are a couple wrinkles but it looks good so I'm happy

there are before and after pics.

 

[Alax7]

Most of it looks good, except in between the pods, must have been a pain to make it work there huh.
What did you use to adhere the cloth? Is the the same as the stock material?

The thing I didn't like about those pods, I'm assuming they are the LSK custom fit one right, is the angle at which they are mounted. They stick out too much and block your view when making left turns, it did when I mounted mine. They could've easily shifted them down closer to the air vent to keep a low profile angle and not obstruct your view. That's the main reason I took it down and decide to make my own pods, in the works.

 

[BlackLS06]

I agree theyre way too high...need to be lower.

 

[jolinc01]

Other than the wrinkles in the center it looks great.

 

[Tru-Blu]

+1

 

[2002_lincolnLS]

the pod is actually a universal pod i mounted to the pillar and then I got glue (dap) and headliner material (has the foam back) so you can see any rough edges around the pod it self.

And alax between the two pods was a total pain in the ass, you almost would have to vacuum form the fabric to wrap it with out any wrinkles.

And the location works for me I sit higher so they look perfect for me.

when I took the picture I was leaning back quite aways to get everything in with out being blurry.