Engine air bleed valve?
- Thread starter ReMiXeDg
- Start date
RigsLS
Dedicated LVC Member
- Joined
- Mar 10, 2012
- Messages
- 7,756
- Reaction score
- 532
On your 3.0L .... http://www.lincolnvscadillac.com/tech/drain-lincoln-ls-cooling-system/
have a look at pic#2
have a look at pic#2
im a bit confused ok is that by the right side or left side of the engine? looks like the left right
so much for black and white drawings i can't seem to find the exact location lol thanks a lot for helping and dealing with me!
megamike
New LVC Member
It's in the middle side to side, near the front of the engine. I didn't figure out how to open it yet. Scared to break the plastic.
Look at the left-front of the engine. It's on that large, upper radiator hose. Under the intake tube, IIRC.
Use a hex-head or Allen wrench......
RigsLS
Dedicated LVC Member
- Joined
- Mar 10, 2012
- Messages
- 7,756
- Reaction score
- 532
@ ReMiX,
http://www.youtube.com/watch?v=b6I5hBplOdQ
8:01 into the vid, he points at and talks about the plastic valve screw.
have a look, perhaps this helps you.
http://www.youtube.com/watch?v=b6I5hBplOdQ
8:01 into the vid, he points at and talks about the plastic valve screw.
have a look, perhaps this helps you.
RichDD
New LVC Member
Very cool..... thanks. Exactly what I was looking for!!!
Sound like Cleavland Brown
There's a much easier way to remove the intake.... The whole air box can be removed; or just the top attached to the intake tube.