Drive shaft on 97 Mark VIII

jruppert

Active LVC Member
Joined
Dec 26, 2009
Messages
98
Reaction score
1
Location
Big Rapids
I have this 97 Mark VIII that I am parting out. I have heard that the 93 is a once piece aluminum setup. I also heard the other years were a two piece. What I dont understand is what makes it a two piece? I am looking at this driveshaft and it appears one piece to me. Are the two pieces actually two separate shafts joined together by a u-joint?
 
Now I understand.. I need to check to see if I have the groove. I doubt its a 93 in there. Are there any uses for this 2 piece setup? I am building an AC Cobra and will need a drive shaft at some point. Could this be modified?
 
Now I understand.. I need to check to see if I have the groove. I doubt its a 93 in there. Are there any uses for this 2 piece setup? I am building an AC Cobra and will need a drive shaft at some point. Could this be modified?

Scrap it or find a T-Bird guy who wants it. They actually have a steel shaft that is worse than the 2 piece on the Marks. I tried to give my 2 piece 97 away for free, no takers.
 
It would probably be goid for the cobra
had a buddy who shortened up one for his fox body mustang
 

Members online

Back
Top