draining engine coolant????

hhoganjr

LVC Member
Joined
Aug 6, 2005
Messages
32
Reaction score
0
Location
bardstown KY
where is the draincock located? Call me stupid --- I can't find it. I've read the tech article, but it does not show where the draincock is on a 2000 LS V6???? PLEASE help


:confused: :confused: :confused: :confused:
 
it's right in the lower passanger corner - it's a white hex keyed plug. You only loosen it enough to allow the coolant to drain out of the pipe just above it.
 
When replacing be very careful. I had to buy a new one last time because I over tightened the little plastic bolt just a hair too much and it broke.
 
? not sure what you are asking...

it's in the bottom of the passenger side of the radiator... at the front of the car.
 
BatMobile said:
When replacing be very careful. I had to buy a new one last time because I over tightened the little plastic bolt just a hair too much and it broke.


whew - I'm not the only idiot.... lol :Beer

DSCF1938 (Small).JPG
 
That is not as frustrating as breaking one when you are trying loosen it to drain the rad. I had two break in succession on my mustang gt. The third one I put a little anti seize on the threads and sealing ring, so it will release with less effort.
 

Members online

Back
Top