Clear corners

[clintjw95]

Is there any clear corners i can get to match the HID's on a 95 Mark? I need some bad cause the HID's next to the old clear corners looks horrable.

 

[95lscowner]

i dont believe they do did yoy try to buff them out

 

[clintjw95]

I used high grit sand paper but it still looked the same.

 

[4.6powa]

just sandpaper, or did you sand and buff too? if all you did was sand, then it is still going to be very cloudy. if not more.

 

[poniesviii]

Yeah. You have to WET sand them in case you didn't, then either 1) clearcoat them 2) buff them with rubbing compound.

edit: buffing won't clean the inside.

 

[1993_M75]

I used Mother's Mag & Aluminum polish paste after wetsanding on headlights. Works great.

 

[Frat-man-du]

Meguiar's PlasticX works great. I did my 98 LSC cloudy a$$ headlights and they look presentable now. Strange they went cloudy almost over a period of a month.

 

[poniesviii]

Meguiar's PlasticX works great. I did my 98 LSC cloudy a$$ headlights and they look presentable now. Strange they went cloudy almost over a period of a month.

Ah. Pick up some 3M two or three stage compound, the money's worth the time it saves.

That scratchX is superdeeeeeeeeeeeeeeeeeduper fine, pretty much as course as dirty water.