LOL. So did I. For at least a couple years. And the on board computer doesn't check those when you press "status" on the dash button, so unless you look, you'll never really know. You have to jack the car up and remove the plastic underpanel in order to reach up and get to the bulb assy for it. I guess you could possibly pry the lens out from the front of the car and try to change the bulb that way, but the way the lens snaps into the bumper cover, you run the risk of breaking the tab on the lens itself. Add to that, the wiring that goes to the bulb is fairly taught, and I dont know if there is enough room to even remove/re-install the twist assembly using this method. (from the front).