For Sale Car audio: JL Audio, ARC Audio, RE Audio

tirefryr

Active LVC Member
Joined
Jun 5, 2010
Messages
80
Reaction score
1
Location
IN
Contact seller
I'm selling some of my car audio gear to purchase another Gen 1 buy, so.. . . . .

First up is a MINT pair of JL Audio slash series amplifiers. I have a 1000/1 and a 450/4. These are great matching amps. No marks aside from the screw holes and used very little. The 1000/1 will supply 1000 watts at any impedance between 1 and 4 ohms. The 450/4 will provide 4 channels of staggered power with 2 channels supplying 75 watts and the other 2 supplying 150 watts into any impedance 1-4 ohms. Both have built in crossovers, but the 450/4 gives you the option to bandpass as well making it very handy for 2-way active.

I'm asking $650 plus shipping for the pair and I really don't want to separate, but money talks. Just to give you an idea, the 1000/1s have been selling on Ebay for around $500 still. They hold their value quite well.

100_1924_zpscec48263.gif

100_1925_zps8c706b65.gif

100_1926_zpsbeeb62c4.gif

100_1927_zps20229fd7.gif

100_1928_zpsfe462a34.gif
 
Next up is a MINT JL Audio 8W7 anniversary edition. This little puppy is an AMAZING driver. I used it for a couple weeks in the JL spec vented enclosure and it was too much for me. People thought I had a pair of 12s in the trunk. It's really an amazing driver. I will include the enclosure if someone wants, but shipping will be expensive. I'd like to get $250 shipped for this.

100_2146_zpsb15e4746.gif

100_2145_zpsdefc2dc1.gif

100_2144_zpsde2fcbe0.gif

100_2143_zps0ee4d0da.gif
 
ARC Audio KS1200.1 This is BRAND NEW IN BOX. I have pulled it out for photos, nothing else. HAs never been mounted or powered up aside from factory testing. This thing retails for $700 online. I'm looking for $400 shipped OBO.

specs are 650x1@4ohms, 1200x1@2ohms, and 1000x1@1ohm.

100_2131_zpsa46f1c2d.gif

100_2132_zps1faae656.gif

100_2133_zpsf6e5f05e.gif

100_2134_zps51e7480f.gif

100_2135_zps1889b463.gif
 
Finally I have a pair of RE8, 8" subwoofers. These are the original drivers before being bought out by US Amps and having the products made in China.

Specs:
Suspension: Santoprene rubber surround. Conex spider.
Frame: Stamped steel basket.
Voice Coil: 8-layer copper voice coil.
Fs = 22.8 Hz
Qms = 4.21
Vas = 0.957 cu.ft
Xmax = 0.472 in
Xmax (parallel) = 0.472 in
Xmax (series) = 0.472 in
Sd = 30.23 sq.in
Qes = 0.76
Qes (parallel) = 0.38
Qes (series) = 0.38
Re = 3.2 ohms
Re (parallel) = 1.6 ohms
Re (series) = 6.4 ohms
Z = 4 ohms
Z (parallel) = 2 ohms
Z (series) = 8 ohms
BL = 1.731 lb/A
BL (parallel) = 1.731 lb/A
BL (series) = 3.462 lb/A
Pe = 87.5 watts
Pe (parallel) = 175 watts
Pe (series) = 175 watts
Qts = 0.64
Qts (parallel) = 0.34
Qts (series) = 0.34
1-W SPL = 78.1 dB
1-W SPL (parallel) = 81.2
1-W SPL (series) = 81.2

They are the bottom two drivers in the middle in this photo.

100_2142_zps16c2698c.gif
 

Members online

Back
Top