htrdlincoln98
Dedicated LVC Member
Anyone in the Baltimore Maryland area interested in some drag time @ Capital Raceway. I'm going tomorrow friday for some last few runs of the year. runs start around 5 PM. Hope to see some other mark's there.
Capital Raceway 11-6-09
- Thread starter htrdlincoln98
- Start date
htrdlincoln98
Dedicated LVC Member
Well if anyone can make it should be a good time. I think a 69 vette and 96 implala SS will be there with me. Its been a little smack talkin for a couple years who's got what. Now that all three cars are up and running its time to see the truth. Wonder how the little 281 with stand up to a
couple 350's!!!!!!
couple 350's!!!!!!
htrdlincoln98
Dedicated LVC Member
Well not sure if any one here showed up but there was another mark Viii guy there?
Didn't miss much as the weather was freezing. With two major clean ups taking over an hour each. The anouncer had the nerve to complain about antifreeze in the system and advised we drain them if so. Keep in mind the air temp as he's talking was like 30 degrees.
Any way got three runs two N/A and one on spray. The spray didn't work so well with the cold temps. Heater on for hours and the bottle only hit 800 psi. after my spray run it was at 600 psi.
First run
R/T .112
60' 1.936
330' 5.777
1/8 8.945@78.07
1000' 11.655
1/4 13.960@98.89
Second run
R/T .111
60' 1.963 spun
330 5.823
1/8 9.005
1000' 11.725
1/4 14.034@98.82
Third run
R/T .182
60' 1.879
330 5.319
1/8 8.378@83.43
1000' 10.873
1/4 13.046@104.53
I was very happy with the N/A runs. Looks like the IMRC helped alittle with the short times? The mickeys made a huge difference on the spray with my best 1.879 60'.
Cann't wait to hit Acto the 21st. See you all there.
Didn't miss much as the weather was freezing. With two major clean ups taking over an hour each. The anouncer had the nerve to complain about antifreeze in the system and advised we drain them if so. Keep in mind the air temp as he's talking was like 30 degrees.
Any way got three runs two N/A and one on spray. The spray didn't work so well with the cold temps. Heater on for hours and the bottle only hit 800 psi. after my spray run it was at 600 psi.
First run
R/T .112
60' 1.936
330' 5.777
1/8 8.945@78.07
1000' 11.655
1/4 13.960@98.89
Second run
R/T .111
60' 1.963 spun
330 5.823
1/8 9.005
1000' 11.725
1/4 14.034@98.82
Third run
R/T .182
60' 1.879
330 5.319
1/8 8.378@83.43
1000' 10.873
1/4 13.046@104.53
I was very happy with the N/A runs. Looks like the IMRC helped alittle with the short times? The mickeys made a huge difference on the spray with my best 1.879 60'.
Cann't wait to hit Acto the 21st. See you all there.
htrdlincoln98
Dedicated LVC Member
Oh yeah almost forgot Rich the SS ran a 15.2
