Attn: Max....parts needed thanks in advance you are the man!!!!

[djknowledge]

I NEED...

4 OF THESE: 18183 SHOCK ABSORBER UPPER MOUNT

ok so i was just told that the ls has 2 shock upper mounts and 2 bearing plates for the front? if this is correct, just send me an invoice for the stuff i need if i am wrong.

4 SPRING LOWER SEATS SINCE MINE DID NOT COME WITH THEM.
4 dust boots if 18183 do not come with it

also if you carry the ball joints for the front lower control arms i would rather buy them off of you....
send me an invoice and i will promptly pay it thanks in advance.

 

[mrzeee]

plate

Thank you for the kind words....
Here is the illustration of the frt shock/struts. There is no boot for the frt just the upper mounting plates.....they are p/n 3w4z-18183-aa listing for 50.32 each and cost you 39.25 each plus shipping.

 

[mrzeee]

Now the rears are a different mount...it comes with a boot...p/n 3w4z-18197-aa listing at 59.33 and cost you 46.28each.

 

[rt2barbers]

Spring/shock mounts

The part numbered 18183 in Mr. Zee's post comes with the metal plate, rubber coil spring isolator and bellows (boot).....what you see is what you get. You should be able to re-use the lower white plastic (delrin) spacer that fits the slant of the coil spring to the flat surface of the shock. Tape it onto the coil spring with masking tape when assembling. Also, you have to orient the upper mount precisely with respect to the position of the shock's bottom mounting hole when assembling the mount/spring/shock so the assembly will fit the chassis. This can be "fine-tuned" by holding the lower shock mount in a vise while using a wooden slat to apply torque to the upper mount studs and rapping the mount with a hammer.