Anyone Running Wheel Adapters??

[ST0CK.LS]

I have been looking for wheels and found a nice set for a good price but they are not 5x108 they are 5x100 or 5x114. If I do run an adapter does anyone know if the wheel will stick out usually adapter are anywhere from 25-35mm I'm looking for a thin adapter. Any advice helps

 

[pektel]

Where did I put that baby spoon... ah, here it is:

http://www.lincolnvscadillac.com/search.php?searchid=1793672

 

[crucian]

Got some adapters I'll sell that I never used. If interested, hit me up.

 

[ST0CK.LS]

Where did I put that baby spoon... ah, here it is:

http://www.lincolnvscadillac.com/search.php?searchid=1793672

Link didn't work

 

[ST0CK.LS]

got some adapters i'll sell that i never used. If interested, hit me up.

message sent!!

 

[pektel]

Link didn't work

sorry, bud. I had performed a basic search for you, and posted the link to the results page. I searched thread titles in the LS section for "adapters". There were 5 or 6 threads on the topic.

Anyways, looks like you got your question answered.

 

[reaper76]

Where did I put that baby spoon... ah, here it is:

http://www.lincolnvscadillac.com/search.php?searchid=1793672

That is some funny Sh!t!!!!

 

[Bullschmidt]

I am the only one I know of using adapters to change PCD around here. A few others have used hub and wheel centric adapters essentially as a spacer.

I would contact http://www.motorsport-tech.com/ and talk to Junior. Mine are 5x108 -> 5x120 and 19mm thick

 

[Ben's LS]

I am the only one I know of using adapters to change PCD around here. A few others have used hub and wheel centric adapters essentially as a spacer.

I would contact http://www.motorsport-tech.com/ and talk to Junior. Mine are 5x108 -> 5x120 and 19mm thick

That's some good stuff. Made in the US too.

 

[M4rk]

Finding high offset wheels to fit isn't that easy. Then again you could have any wheel machined to increase the offset.