another Accel coil question

[MMAFIGHTER121]

since the Accel coils seem to have about the same 50/50 review as ebay stock coils on the fail-o-meter I was going to pick them up for the little amount of extra dough that it turns out to be - now i've heard that the kink in the usual coil part 140032 - the ones i'm pretty sure everyone has used is causing the fit to be a little off and making people recycle their old boots and whatnot; so looking around there is a similar product just with a minor fitment difference from what i can see:
accel coil part 140034. would these work? fit better?
http://www.accel-ignition.com/ProductsListByMinID.aspx?minID=5051&majID=505&selection=0&minselection=0
140032 is for a 2 valve and 140034 is for a 4 valve... would that cause an issue?

 

[MMAFIGHTER121]

no one with any mustang/ls know how out there to help?

 

[Bdirt]

one is for 2 valve and the other is for 4 valve

 

[MMAFIGHTER121]

right i said that to begin with i was wondering if they'd fit and work in the LS

 

[MMAFIGHTER121]

Old bump - still haven't bought them.. managed to pass inspection without the full repair!

 

[02V8Sport]

I ran the ACCEL coils for a while and they are junk. They were misfiring within a few weeks.

 

[zintkala]

I ran mine for a couple of months before going to a set of Autozone coils (which have no warranty by the way). With the Accell coils it seemed a little faster and slightly better fuel mileage but they replaced three of them before telling me that they wouldn't honor the warranty any further and I had to mail them back to Accell each time before they would send me another. Screw that and Accell. I may try the MSD's at some point but for right now the generic replacements have been fine for a year now and I ran a 14.2 on my 19's last October so they can't be too bad.

 

[SPSully]

ive been running the accel coils for a while now with now issues. I have the 2v ones and dont know if the 4v will work on these or not