Alarm can it be Disabled

[MrScalia]

my wifes `94 , we haven't be able to use the alarm if you set it , it would go off with 7 mins.

Just started today the alarm just going off with out being set ..... even the alarm going off as she was driving!

So I want to unplug it . Anyone know How??

 

[Moes8]

i copied this from an older post from rmac694203




If you want to disconnect the module and be done with it, just open up the glovebox all the way so it drops down. Then look to the right hand side. There is a white module (on my 96 it's white) that is mounted pretty much horizontally. It has 2 white connectors plugged into it that are facing you. Unplug those two connectors and you're done. That's what I did to mine and no more waking up at 4 am with my horn blaring.

 

[ford nut]

Yep that will do it or you can take the 3 screws under the glove box take the cover panel off and unplug the two plugs.
http://www.markviii.org/htdocs/dc/dcboard.php?az=show_topic&forum=22&topic_id=31362&mesg_id=31362&listing_type=search